US-FED-00000382554 - TPT Manual Wire Bonder - Deadline June 26,2026

NIST–SS26–096640 / 333242Primary POC: Liz Timberlake (Eliz[email? redacted])Secondary POC: Forest Crumpler ([email? redacted])Title: TPT Manual Wire BonderBACKGROUND***THIS IS A NAME BRAND NAME ONLY SOURCES SOUGHT NOTICE ***The National Institute of Standards and Technology (NIST) is seeking information from sources that may be capable of providing a TPT manual wire bonder. The North American Industry Classification System (NAICS) code for this acquisition is 333242.NIST has a need for a TPT manual wire bonder that meets or exceeds the following draft minimum specifications:Technical specifications.The wire bonder shall be capable of wedge, ball and ribbon wire bonding.The wire bonder shall allow a trained user to reconfigure the wire bonder for each of these bonding modes within 5 minutes.The wire bonder shall be capable of manual operation, where the X and Y positioning of the sample and Z position of the bonding tool are all manually controlled by the user.The system shall support gold wire diameters from 17 um to 75 um (0.7 mil to 3 mil).The system shall support aluminum wire diameters from 17 um to 75 um (0.7 mil to 3 mil).The system shall support ribbon wire width from 20 um to 250 um.The system shall have an ultrasonic transducer with PLL control operating between 60 and 70 kHz.The system shall provide an ultrasonic power output range from 0 to 10 W.The system shall provide a bond time range from 0 ms to 20,000 ms.The system shall provide a bond force range from 5 cN to 200 cN.