EMSC Generator Radiator Replacement Services

The purpose of the requirement contract awarded following an evaluation of the bid received is to replace the radiator at the Northeast Ohio Regional Sewer District (NEORSD) EMSC Caterpillar stationary generator. The EMSC stationary generator is a Caterpillar Model 3512, 1.5-Megawatt unit. The radiator on the stationary generator has been determined to be at end of life and must be replaced. The NEORSD has obtained the services of a local radiator repair shop to perform a survey and to determine the approximate size and makeup of the existing radiator. That data from the survey is for information purposes only (see Appendix A). The contractor shall not rely on the accuracy of the survey but use it as an approximate size and requirements of the radiator to be replaced. The contractor shall be responsible for all permits, fees, tests, inspections, certifications, and applicable requirements relative to the execution of the Scope of Work specified herein. Contractor shall provide all labor, transportation, fuel, parts, materials, tools, equipment, supervision, incidentals, Codes and Standards, personal protective/safety equipment and devices, manuals, procedures, and services necessary for the safe, injury-free completion of all services performed under the scope of this Contract. All inspections and reporting shall be performed in compliance with the current applicable federal, state of Ohio, and local codes, standards, laws, and regulations. The contractor shall be aware that stand-by power systems and associated equipment may be contaminated with sewage that may or may not have received some type of treatment.