CONS-24230 - USA (Texas) - RFI for Design and Construction Services - Sources Sought - Deadline October 14,2026

– Building Structure & Dimensions: Design, fabricate, deliver, and erect a 53'–0“ W x 90'–0“ L x 18'–0“ Eave Height (5,208 sq. ft.) gable Pre–Engineered Metal Building (PEMB) capable of meeting 2018 International Building Code (IBC) standards and 115 mph wind speeds (Exposure C). Floor–to–ceiling interior clearance shall be not less than 14 feet above the floor slab.– Slab & Substructure Foundation: Utilize the existing 53' x 90' concrete slab/ramp as the finished floor. Clean, pressure wash, and apply a high–grade clear penetrating concrete sealer (epoxy not required). Construct a new reinforced concrete perimeter foundation outside the footprint of the existing slab, consisting of 20 augured cylindrical piers (30“ diameter x 6'–0“ deep) spaced at 10'–0“ O.C., a 3'–0“ high perimeter concrete skirt/stem wall, and 4“ concrete infill between the existing curb and new skirt wall.– Building Access & Overhead Doors: Furnish and install two (2) 16'–2“ W x 14'–1“ H commercial insulated sectional roll–up doors (R–12.76 rating) on the east (53') facade with manual chain hoists, designed to accommodate large mobile asset trailers. Provide two (2) interior manual chain hoists for equipment handling. Install two (2) 3'–0“ x 7'–0“ hollow metal personnel egress doors with panic hardware (one on the east face between the roll–up doors, and one on the south face).– Thermal Envelope & Environmental Controls: Install full R–11 roof and wall blanket insulation with white/reflective foil vapor retarder facing. Equip the facility with interior unit heating for freeze protection, passive/active exhaust ventilation fans with automated louvers, and complete perimeter joint caulking and elastomeric weather sealing.– Electrical & Exterior Lighting: Install commercial LED exterior wall–pack luminaires above bay openings and access doors, connected to the adjacent facility overhead/underground electrical power feed.Civil & Asphalt Paving Work: Design and construct heavy–duty asphalt paving adjacent to the east bay doors to facilitate heavy trailer maneuvering into storage bays. Grade earthwork around the perimeter skirt wall for positive surface drainage away from the structure. Implement SWPPP measures during construction. (Sub–surface drainage piping, domestic water, and plumbing are explicitly excluded).