Untitled opportunity

DATA EQUIPMENT FOR DISTRICT BUILDINGS. 28X NETWORK SWITCHES, CISCO C9300L-48UXG-4X-E OR EQUIVALENT OR CISCO C9200L-48PXG-4X-E OR EQUIVALENT: 48 COPPER PORTS, MINIMUM POE+ SUPPORT ON ALL ACCESS PORTS. MODULAR UPLINKS PORTS, SFP/SFP+ CAPABLE, 10G CAPABLE. FIXED MULTI-GIG PORTS (12 OR MORE PER SWITCH). 1100W POWER SUPPLY WITH THE CAPABILITY OF HOUSING A SECONDARY PSU AT A LATER DATE. ALL ACCESS PORTS ARE CAPABLE OF AUTO ADJUSTING SPEED (10,100,1000) AND DUPLEX. THE SWITCH MUST BE RACK MOUNTABLE AND THE HARDWARE INCLUDED. THE SWITCH MUST HAVE THE ABILITY TO STACK WITH OTHER SWITCHES IN THE SAME CLOSET. ALL NECESSARY CABLES WILL BE REQUIRED TO STACK WITH EVERY SWITCH. THE SWITCH SHOULD BE ABLE TO BE MANAGED LOCALLY OR OVER THE NETWORK, NOT CLOUD-BASED. THE SWITCH SHOULD BE ABLE TO HANDLE LAYER-3 TRAFFIC AND ALL STANDARD NETWORK AND ROUTING PROTOCOLS. THE SWITCH MUST BE ABLE TO WORK IN OUR CISCO NETWORK WITHOUT ADDITIONAL PURCHASES/SERVICES. ALL REQUIRED LICENSING AND ANY CORDS NEEDED FOR THE DEVICE TO FUNCTION. 110X NETWORK ACCESS POINTS CISCO MERAKI CW9176I OR EQUIVALENT; MUST BE COMPATABLE WITH THE DISTRICTS EXISTING MERAKI WIRELESS CLOUD-CONTROLLED ENVIRONMENT. AP MUST BE WIFI 7 COMPATABLE. AP MUST BE FUNCTIONAL ON POE=(802.3AT) POWER PROVIDED BY LOCAL NETWORK SWITCHES. AP MUST SUPPORT ALL STANDARD WIRED AND WIRELESS TRANSMISSION STANDARDS FOR AP'S. AP MUST BE ABLE TO FUNCTION WHEN POWERED/CONNECTED TO CISCO SWITCHES. 28 NETWORK CONNECTION DEVICE SPF-10G-SR-S OR EQUIVALENT: THE DEVICE MUST BE COMPATIBLE WITH MODERN NETWORK SWITCHES. THE DEVICE SHOULD BE IN SFP/SFP+ FORMAT.THE DEVICE MUST BE ABLE TO SUPPORT BI-DIRECTIONAL SPEEDS OF UP TO 10 GBPS. THE DEVICE SHOULD BE ABLE TO CONNECT LC-STYLE CABLES. THE DEVICE MUST BE CISCO COMPATIBLE. 61X RACK MOUNTABLE UPS EATON TRIPP LITE SMART1500RM2U OR EQUIVALENT: UPS MUST BE RACK MOUNTABLE. UPS MUS BE 2U AT MOST AND FIT IN A STANDARD 19" (INSIDE WIDTH) DATA RACK. UPS MUST BE AT LEASE 1500VA AND 1350W OR HIGHER. UPS POWER CORD MUST BE 5-15P. UPS SHOULD HAVE 8 OR MORE OUTLETS. UPS MUST BE ABLE TO CONDITION POWER TO PROVIDE OUTLETS TO PROTECT END-DEVICES FROM BROWNOUTS AND OVER-VOLTAGES.