ANIM-10058 - USA (Washington) - Metal Sign Posts Supplies - Deadline November 20,2026

(1) Vendor needs to provide metal sign posts supplies. – Provide metal signposts and related materials to support agency’s infrastructure needs. • Finished galvanized surfaces: Material (cold rolled steel) is to be finished with hot dipped galvanized coating.• Shape: The cross section of the posts shall be square tubing formed of the specified gauge steel, carefully formed in size and, if necessary, shall be welded in such a manner that weld or flash shall not interfere with telescoping.• Perforations: Hole diameter shall be 7/16” plus or minus 1/64” on 1” centers on all four sides the entire length of the post. • Yield/tensile properties: 60,000 PSI Minimum Yield/65,000 Minimum Tensile.• Tolerances on outside sizes• Wall thickness tolerance: Permissible variation in wall thickness is plus .011” minus .005”.• Convexity and concavity: Measured in the center of the flat side, tolerance is plus or minus .010” applied to the specific size determined at the center.• Squareness of sides and twists• Length: The length of each post shall be specified and have permissible length tolerance of plus or minus 1/8” (0.125”).(2) All the questions must be submitted no later than November 13, 2026.