30-Yard Roll-Off Dumpsters

Capacity: Minimum 30 cubic yards (22.94 cubic meters).Dimensions: Minimum 22 ft (6.71 m) length x 8 ft (2.44 m) width x 6 ft (1.83 m) height.Color: Milford Brown or closest available match.Structural Welding: Must conform to AWS D1.1 American Society Structural Welding Code - Steel. Understructure: Minimum 3 in. (76 mm) structural channel, 4.1 lbs./ft (6.1 kg/m), spaced at 1.75 in. (44 mm) on center.Long Rails: Minimum 2 in. x 6 in. x ? in. (51 mm x 152 mm x 6 mm) rectangular tubing.Bullnose: Minimum solid 1 ? in. (32 mm) plate burnout. Floor: Minimum 10-gauge steel with reinforced 3 in. (76 mm) channels on 18 in. (457 mm) centers.Push Plate: Minimum 26 in. x 16 in. x 3/16 in. (660 mm ? 406 mm ? 5 mm) steel plate. Hook Plate: Minimum 23 in. x 15 in. x ? in. (584 mm ? 381 mm ? 19 mm) steel plate. Top Snatch Hook: Positioned at 62 in. (1,575 mm) height (A-frame configuration).Wheels: Minimum 8 in. diameter x 10 in. length (203 mm x 254 mm). Wheel Axles: Minimum of 1-? in. (38 mm) solid round bar with grease fittings.Tailgate Hinges: Minimum of three (3 steel hinges each designed for high-load applications and equipped with grease fittings. Side Walls, Bulkhead, and Tailgate: Minimum 10-gauge steel.Top Rail: Minimum 4 in. x 4 in. x ? in. (102 mm ? 102 mm ? 6 mm) rectangular tubing. Front Posts: Minimum 2 in. x 5 in. (51 mm ? 127 mm) formed steel. Rear Corner Post: Minimum 3-? in. x 7 in. x 3/16 in. (89 mm ? 178 mm ? 5 mm) formed steel. Tailgate Frame: Minimum 3 in. x 4 in. x 7-gauge (76 mm ? 102 mm ? ~4.6 mm) rectangular tubing. Tailgate Latch: Vertical lift handle required. Materials Standard: All structured steel shall be ASTM A36 American Society for Testing and Materials Specification A36 and conform to AISC American Institute of Steel Construction ?Specifications for Design, Fabrication, and Erection of Structural Steel Buildings? requirements.